Products
Levelift Provides Design & Installation for New Construction Piles, Tie-Backs & Foundation Repair Systems
CHANCE Helical Pile new construction piles and anchors
Helical Tie-backs and soil nails for retaining walls
CHANCE Helical Pull-down Micropiles
New construction helical piles
Solar array helical foundations
Engineering and design services for helical pile foundations
Underpinning for settling foundations
Fortress Carbon Fiber Reinforcement Systems
Our Products:
Square Shaft Helical Piles (SS)
CHANCE SS series -1.5″ square shaft galvanized helical piles up to 2.25″ solid bar square shaft helical piles to meet your structural needs.
SS5 Details
SS175 Details
SS175 Transition
SS200 LEAD
Round Shaft Helical Piles (RS)
The CHANCE round shaft anchors are produced in a 2.78 pipe pile up to 8″ diameter piles for higher loaded projects.
RS2875.203 Helical Leads
RS3500 Details
Combination Helical Piles (SS-RS)
Combination Pile products used mainly in compression applications in areas where soft/loose soils are located about the bearing strata (hard/dense soils).
Cast Transition
Helical Pulldown Micropiles
The Helical Pulldown® Micropile (HPM) forms a grout column around the shaft of a standard helical anchor/pile.
Helical Pulldown
Helix Bearing Plate
- SS5 – Hot rolled carbon steel sheet, strip, or plate per ASTM A572, or A1018, or A656 with minimum yield strength of 50 ksi. Plate thickness is 3⁄8″.
- SS150 and SS175 – Hot rolled steel sheet, strip, or plate per ASTM A656 or A1018 with minimum yield strength of 80 ksi. Plate thickness is 3⁄8″.
- 278 – Hot rolled steel sheet, strip, or plate per ASTM A36 or A572 with minimum yield strength of 36 ksi. Plate thickness is 3⁄8″.
- Helix bearing plates are formed on matching metal dies to true helical shape.
Extension Section Couplings
- Shall be formed as integral part of the plain extension shaft material. For SS anchors, couplings shall be hot upset forged sockets.
- Shall be formed as integral part of the plain extension shaft material. For 278 material, couplings shall be hot upset expanded sockets.
Helical Pile Shaft
- SS5 – Hot rolled Round-Cornered-Square (RCS) 11⁄2″ solid steel shafts conforming to the general requirements of ASTM A29. Medium carbon steel grade with improved strength due to fine grain size.
- Installation Torque Rating: 5,500 ft.-lbs.
- Minimum Ultimate Tension Strength: 70 kips (Criteria – Coupling Bolt)
- Minimum Ultimate Tension Strength: 55 kips (Criteria – Torque)
- SS150 (11⁄2″ solid steel shaft), and SS175 (13⁄4″ solid steel shaft) – Hot rolled Round-Cornered-Square (RCS) conforming to the general requirements of ASTM A29. High Strength Low Alloy (HSLA), low to medium carbon steel grade with improved strength due to fine grain size.
- 278 – Structural steel tube or pipe, welded or seamless, in compliance with ASTM A500. Wall thickness is 0.203 inch (Schedule 40). Torque strength rating is 5,500 ft-lb. Minimum yield strength is 50 ksi. Minimum ultimate tension/compression strength is 60 kip.
Foundation Repair Bracket
- Brackets are formed from steel that meets or exceeds the requirements of ASTM A36, and have a hot-dipped galvanized coating per ASTM A153.
Get in Touch
Open Hours
Mon-Fri: 7:30 a.m. - 5:00 p.m.
Sat-Sun: Closed
Our Office
10370 Baltimore National Pike
Ellicott City, MD 21042
Contact Us
Call Levelift Foundations, LLC to discuss all your foundation repair and new construction needs at 410-480-4848 or fill out our form below.